Free standard US shipping. Need over night or 2 day? Call.
The pre-wired pigtail has wires that will connect with items in your main electrical panel. They are labeled and are as follows: CB wires are to be attached to the Circuit Breakers; BC wires are to be attached to the home's Branch Circuits. This installation is very straightforward but should be performed by a licensed home electrician. Once the panel is mounted and the pigtail connected, the process should take less than one hour. Refer to our Installation Instructions (PDF) below for more detail and specific instructions on zoning.
Be in control of your EMF environment and LiveEMFSafe
This is a note to Dan and the EMFSafeSwitch team: “I installed my EMFSleepSwitch and it is so cool! I’m not an electrician but am a DIY guy and it was a piece of cake. It was so cool to hit the fob buttons and turn my zones on and off. . . Getting a fob for each zone was a bonus . . . didn’t anticipate that. Anyway, my wife is really enjoying using the lights in the bedroom to read at night, then killing everything when it’s time to sleep. Thanks to you all for a great product!” . . . Steve
Mount the EMFSafeSwitch on the wall and secure the pigtail to the main electrical panel.
Label your selected circuit breakers. Identify each circuit breaker's connected branch circuit home line.
Disconnect the branch circuit home lines from their circuit breakers (not shown).
Attach the CB-1 wire from EMFSafeSwitch to your #1 circuit breaker.
Connect the BC-1 wire from the EMFSS to your #1 branch circuit home line.
for all of your identified circuit breakers and their associated branch circuit home lines.
Attach the power wire from the EMFSS to a 15 or 20 amp breaker.
Attach the neutral (white) and the ground (green) wires from the EMFSS to their standard main panel connection points.
Select control and zone options with designated switches in the EMFSS.
Attach low voltage wire (customer supplied) to connection nuts if hardwired control option is desired.
Velcro the remote nearby your bed for accessibility and ease of use.
EMFSafe is the American manufacturer of the UL listed EMFSafeSwitch
(Also EMFSleepSwitch and original EMFKillSwitch)
If you are working with one of our affiliates, please contact them first with questions.
Feel free to call us but check the web site first, thanks.
Oregon main - 541-944-EMF0 (3630)
Operations - 972-849-9500
Technical Support - 541-538-9529
Copyright © 2021 EMFSafe - All Rights Reserved.
Powered by GoDaddy Website Builder