Manufactured in & ships from America • Free standard US shipping.
“Dirty Electricity” (“DE”) is electrical pollution on an electrical current, an artifact or harmonic of the 120VAC, 60 Hz circuit. It rides on this current / voltage, no power, no “DE”. Electrical Engineers in Industry do not even talk about “dirty electricity/DE”. They DO talk about “power quality” (PQ) & electromagnetic interference (EMI) & high voltage transients & harmonics caused by non-linear loads, these are the proper names for “dirty electricity”.
Dirty Electricity (“DE”) is a very small % of the total electromagnetic fields (EMF) in your house & on any given circuit. Filtering 100% of the “DE” (if that was possible) leaves the circuit/voltage it “rode in on” still there along with the great majority of the other EMF. A 60 Hz electric field is VERY bio reactive, it cannot only affect your DNA, immune system, melatonin & sleep but also your biome (gut health) etc. Therefore, the #1 solution to in home “DE” & all other EMF is to remove the source, which is what the EMFSafeSwitch with built in “DE” filter does. (See below)
”DE” can come into your home from the outside, from the power company, even from neighbors solar panels, pool and/or well pumps, ”smart” meters etc. especially if you share a transformer. If you live in a neighborhood there is a good chance you share a transformer with at least 5 - 10 other homes. Obviously we cannot control these sources or turn them off so a whole house “DE” filter, at the main panel, becomes the best solution to reduce them from coming into your house. (See the TWACS exception below).
Inside sources of “DE” are CFL bulbs, some LED bulbs, light dimmers, switch mode power supplies, variable speed motors, mini split heaters etc.
Most of these sources can be either removed or controlled. For the ones you can’t, or don’t want to, turning off these circuits not only removes all the “DE” but also ALL the other EMF’s. This is the best solution especially at night. For the circuits that need to stay on, again a “DE” filter becomes the solution.
The amount & type of “DE” you have in your home changes throughout the day & year. Solar panels do not produce “DE” in the evening/night - pool pumps, water heaters, refrigerators, AC/heater, switch mode power supplies, lights etc. all cycle on & off. AC in the summer and heating in the winter will produce differing amounts and types of “DE”. The EMFSafe PQFilters™ were the best all-around “DE” filters available in 3rd party engineering tests.
“DE”, power quality / EMI problems are very real and certain industries spend 10’s even 100’s thousands of dollars to filter and “clean up” their power to protect their equipment. Audiophiles, (people who are into sound) often spend thousands of dollars on filters to clean up their electricity to improve sound quality.
Some people are physically sensitive to these specific frequencies, “DE” makes them sick. For these people “DE” is very serious.
“DE” is a small part of a much larger EMF problem and seeing as all EMF is cumulative a holistic approach is the most effective. The best results happen when your cumulative EMF load is reduced. People see amazing results when they switch off bedroom circuits/EMF at night and establish an EMF mitigated, “DE” free sleep sanctuary. Don’t settle for a 5% solution,
Removing the source of the “DE” is the #1 solution. When you can’t, the #2 solution is to switch off the power the “DE” rides on (is part of) and when you can’t do that, the #3 solution is to filter.
Remember, “DE” is just the tip of the EMF iceberg.
An EMFSafeSwitchPQ with built in “DE”/EMI PQFilter™1 is designed for smaller homes with average “DE” and no solar or pool pumps on your shared transformer. Lets you remotely and safely cut off circuits AND filter.
An EMFSafeSwitchPQ with built in “DE”/EMI PQFilter™2 is designed for larger homes and/or any home with heavy “DE” from Solar inverters, pool and/or well pumps, “smart” meters etc. The PQFilter™2 gives you the most complete, customizable solution which lets you remotely and safely cut off circuits AND filter. The PQFilter™2 has two setting to fit your filtration needs. Call us today to get started.
Not so “smart” meters have a switch mode power supply which cause “DE” that comes into your house. A whole house “DE” filter a the main panel will help reduce this “DE” in your home. That said, a TWACS ”smart” meter does not use an RF signal to transfer dats but low frequency pulses on the power line. There is no “DE” filter (we know of) that filters these low frequency pulses (600 Hz to 800 Hz). An EMFSafe cut off switch is the only way to stop this “DE” in your home.
Read our Blog on - Not so “smart” meters - & read the TWACS info below.
The TWACS smart meters communicate with the utility by adding low frequency signals (400 to 600 hertz range) to the electrical lines. Some utilities promote such power line carrier (PLC) systems as a positive alternative to wireless smart meters. The reality is that all PLC technologies are problematic, including the “pulsing” TWACS systems. The basic facts are that the TWACS system:
If your neighborhood has TWACS meters, the electricity in your home will have these low frequency pulses attached to it (even if you opted out) and ALL no “DE” filter we know of can filter out these low frequencies.
The EMFSafe cut off switch is the ONLY way to stop these low frequencies from affecting you (especially at night) by cutting off the circuits (and power) that carry them. The EMFSafe PQFilter™ will filter the “normal” ”DE” coming into your home and on ALL the circuits in your home.
Over 400 Utility Companies use TWACS meters
#1 - When you can, remove CFL/LED bulbs, dimmers, switch mode power supplies, “smart” meter etc.
#2 - When you can, turn off the power, especially at night. “DE” does not exist by itself, no power, no “DE”.
#3 - A whole house filter at your main panel will reduce the “DE” coming into your home & from your home.
With EMF the final straw, the “straw that breaks the camels back” for many people is “Dirty Electricity” (DE), for others it is a “Smart” meter or new cell tower close to their home.
This “straw” has ALL their attention and yes “DE” can be an issue and can be filtered. “Smart“ meters can be removed and we should do what we can.
However, addressing/reducing the load, already on the “camel” could be the most simple and effective solution. Reduce the load, save the camel.
What if we reduce all the other EMF in the home affecting the immune system & causing sensitivity in the first place? Just maybe that “last straw” would not be such an issue. The best (only) way to deal with “DE” (EMF) on the outside is to reduce “DE” (EMF) on the inside.
An EMF mitigated sleep sanctuary is THE solution for many people and has been their way back to optimum sleep & health.
(The only “DE” filter available on the market with a cut off switch to reduce ALL EMF on any selected circuit.)
FaceBook • Instagram • YouTube
EMFSafe is the American manufacturer of the UL listed EMFSafeSwitch
(Also EMFSleepSwitch and original EMFKillSwitch) and the PQFilter™
If you are working with one of our affiliates, please contact them first with questions.
Feel free to call us but check the web site first, thanks.
Oregon main (phone only) - 541-944-EMF0 (3630)
Operations (phone/text) - 972-849-9500
Technical Support / Custom shop - 541-538-9529
515 Antilles Lane, Medford, Oregon 97501
Copyright © 2022 EMFSafe - All Rights Reserved.
Powered by GoDaddy Website Builder