Manufactured in & ships from America • Free standard US shipping.
The only way to know how many circuits to turn off is to measure. If you are not working with one of our affiliates or a local EMF consultant the BVK is the way to go - Be informed. AND if you are working with a consultant, get a BVK to Stay informed.
“NP” Wiring turns off the neutral and power simultaneously for safer earthing/grounding and disconnects the source of electronic harmonics (dirty electricity). Each relay handles 1 NP & 1 SP circuit giving you maximum zone control.
“SP” Wiring turns off the power line only. A circuit = 1x 120 volt circuit breaker in your electrical panel. A relay is a remote controlled switch.
Each relay can optionally switch 3 SP circuits.
If you are concerned with and/or affected by “dirty electricity - DE” you need a whole house, 24/7, “Dirty Electricity DE”, Electromagnetic Interference, power quality PQFilter™ built into your EMFSafeSwitch.
Zones allow you to switch your circuits at different times, e.g. turn the children’s room(s) off first (zone 1) then your room off later (zone 2). “NP” circuits can be controlled individually, “SP” circuits in groups of three. Other than the SP-06 which is 2 zones only, all switches are available in 2 or 4 zone options. In the store there is a drop down menu for you to allocate circuits to zones. Call your affiliate or us if you have questions.
If you have an affiliate coupon code for a discount and it does not work PLEASE contact the affiliate. If you cannot reach them text it to 972.849.9500 with your name, phone number and the affiliate name and we will help.
Our goal is to ship all (non custom) orders out within a week.
Our FREE FedEx delivery normally takes 3 days shipping on the west coast but the east coast takes about a week, Canada 2 weeks is normal.
Call if you want/need expedited shipping.
All that said, as much as we try to keep all parts in stock, with supply chain issues, there maybe some additional delays . . . this applies to shipping times also.
“HP” If you have any 240VAC (high power) circuits to turn off - they require a separate “HP” switch. Our normal ”HP” switch handles up to 40AMPS. If your 240VAC circuit is more than 40 AMPs we need to know.
”MP” offers SAFE Manual Disconnect. No remote control. This switch is installed on the wall next to your panel and has one or two manual switches on the side. Perfect for when remote control is not required and/or for circuits that are used occasionally or seasonally. May even be a solution in a small/“tiny” house.
“UL” stands for Underwriters Laboratory who are a third party certification organization that certifies the safety of electrical products. This is not only required by law it also protects you. Can any electrician build a “cut-off” device? Yes, but if they are not UL (or other third party certified) it would not be legal (or safe) according to NEC code.
All switches are covered by an 18 month warranty, parts and materials.
Products returns in good condition within 30 days of purchase will be refunded with a $30 restocking fee in addition to extra expenses incurred like bank processing fees. $10 on BVK's. Once a switch has been installed we cannot accept it back due to UL licensing restrictions.
Add consulting if you are not already working with someone and you need help in your assessment. We can video link with you and walk you through part or the whole process.
A typical kit costs about $340, and handles 4 circuits and has only 1x zone (read the small print). This does not include the enclosure, mounting rail, conduit or wires that your electrician must supply (+$100). We are told by electricians it takes 3 - 5 hours to assemble @ $100 - $150 per hour (+$300 - $750). So an assembled 4x “SP” circuits, 1x zone KIT = $740 - $1,190 and is NOT UL listed (see below*). To add each additional zone and 4 “SP” circuits costs +$140.
A 12x (SP) circuit, 3 zone kit therefore costs $620 + $100 (parts) + $300 - $750 (assembly/labor) so ACTUAL cost of an assembled kit = $1,020 - $1,470 . . . and is NOT UL LISTED*, does meet NEC code And has a power supply that creates “DE”.
EMFSafeSwitch 12 “SP” circuits, 4 zones (ready to install) $1,212.30 . . . UL LISTED and low EMF.
* The parts in the kit are UL listed but NEC code states that when 3 or more parts are put together in a new enclosure you are creating a new product which requires it’s own UL inspection. Therefore, even a kit of UL parts assembled outside of a UL shop is NOT UL, does not meet NEC code - and could void your home owners insurance.
All of the parts EMFSafe uses in the EMFSafeSwitch are also UL listed AND we spend thousands of dollars to be a 508A UL listed industrial panel shop so that our assembled switch (finished product) can be UL listed (third party certified) so you are protected and can . . . LiveEMFSafe.
The EMFSafeSwitch is built in a 508A UL industrial control panel shop and come as a complete unit ready to install. Being UL listed they are safe for your home, will pass building inspection and not risk voiding your home owners insurance (which a non-UL listed product could).
Can any electrician build a “kill” switch?
Yes BUT: not legally per the National Electrical Code (NEC) which states certain electrical equipment requires a 3rd party inspection for safety. For our product we use UL (Underwriters Laboratory) because they the oldest and most recognized certification agency . They inspect and certify that our product is in compliance, meet the requirements and allows us to give it a UL listing. Even a kit made of UL listed parts is NOT a certified product because it is not 3rd party inspected for safety.
What does this mean for the consumer?
If a "kill switch" is installed without 3rd. party certification a building inspector could (should) have you remove it. In case of a claim, if your insurance company finds a non-certified product, it could void your home owners insurance.
AND THIS HAS HAPPENED
FaceBook • Instagram • YouTube
EMFSafe is the American manufacturer of the UL listed EMFSafeSwitch
(Also EMFSleepSwitch and original EMFKillSwitch) and the PQFilter™
If you are working with one of our affiliates, please contact them first with questions.
Feel free to call us but check the web site first, thanks.
Oregon main (phone only) - 541-944-EMF0 (3630)
Operations (phone/text) - 972-849-9500
Technical Support / Custom shop - 541-538-9529
515 Antilles Lane, Medford, Oregon 97501
Copyright © 2022 EMFSafe - All Rights Reserved.
Powered by GoDaddy Website Builder