Free standard US shipping. Need over night or 2 day? Call.
If you are working with one of our affiliates remember to use their code at check out, thank you.
Not working with an affiliate, please go through our web site and if you still have questions, call.
If you have an affiliate coupon code and it does not work PLEASE contact the affiliate. If you cannot reach them text it to 972.849.9500 with your name and the affiliate name and we will try to help.
The only way to know how many circuits to turn off is to measure. If you are not working with one of our affiliates or a local EMF consultant the BVK is the way to go - Be informed. AND if you are working with a consultant, get a BVK and Stay informed.
“NP” Remotely turns off the neutral and power simultaneously for safer earthing/grounding and disconnects the source of electronic harmonics (dirty electricity). Each relay handles 1 circuit giving you maximum zone control.
“SP” Remotely turns off the power line only. A circuit = 1x 120 volt circuit breaker in your electrical panel. A relay is a remote controlled switch. Each relay in the SP handles 3 circuits, this is our economy remote switch.
”MP” offers SAFE Manual Disconnect. No remote control. This switch is installed on the wall next to your panel and has two manual switches on the side. Perfect for when remote control is not required and/or for circuits that are used occasionally or seasonally. May even be a solution in a small/“tiny” house.
“HP” If you have any 240VAC (high power) circuits to turn off they require a separate “HP” switch. Our normal ”HP” switch handles up to 40AMPS. If your 240VAC circuit is more than 40 AMPs let us know.
Zones allow you to switch your circuits at different times, e.g. turn the children’s room(s) off first (zone 1) then your room off later (zone 2). “NP” circuits can be controlled individually, “SP” circuits in groups of three. Other than the SP-06 which is 2 zones only, all switches are available in 2 or 4 zone options. In the store there is a drop down menu for you to allocate circuits to zones.
“UL” stands for Underwriters Laboratory who are a third party certification organization that certifies the safety of electrical products. This is not only required by law it also protects you. Can any electrician build a “cut-off” device? Yes, but if they are not UL (or other third party certified) it would not be legal (or safe) according to NEC code.
Add consulting if you are not already working with someone and you need help in your assessment. We can video link with you and walk you through part or the whole process.
We like to ship all in stock orders within 48 hours (your enclosure and/or zone configuration may affect this). We try to ship every (non custom) order within 5 days.
Normally you should allow 5 days (1 week) for our FREE FedEx delivery but some zip codes take longer, Canada 2 weeks is normal.
Call if you want/need expedited shipping.
All that said, as much as we try to keep all parts in stock, with COVID, there maybe some additional delays . . . this applies to shipping times also.
All switches are covered by an 18 month warranty, parts and materials.
There is a $30 restocking fee for returns in good condition. $10 on BVK's. Once a switch have been installed we cannot accept it back.
The EMFSafeSwitch is built in a 508A UL industrial control panel shop and come as a complete unit ready to install. Being UL listed they are safe for your home, will pass building inspection and not risk voiding your home owners insurance (which a non-UL listed product could).
Can any electrician build a “kill” switch?
Yes BUT: not legally per the National Electrical Code (NEC) which states certain electrical equipment requires a 3rd party inspection for safety. For our product we use UL (Underwriters Laboratory) because they the oldest and most recognized certification agency . They inspect and certify that our product is in compliance, meet the requirements and allows us to give it a UL listing. Even a kit made of UL listed parts is NOT a certified product because it is not 3rd party inspected for safety.
What does this mean for the consumer?
If a "kill switch" is installed without 3rd. party certification a building inspector could (should) have you remove it. In case of a claim, if your insurance company finds a non-certified product, it could void your home owners insurance.
AND THIS HAS HAPPENED
EMFSafe is the American manufacturer of the UL listed EMFSafeSwitch
(Also EMFSleepSwitch and original EMFKillSwitch)
If you are working with one of our affiliates, please contact them first with questions.
Feel free to call us but check the web site first, thanks.
Oregon main - 541-944-EMF0 (3630)
Operations - 972-849-9500
Technical Support - 541-538-9529
Copyright © 2021 EMFSafe - All Rights Reserved.
Powered by GoDaddy Website Builder